Bleep Drum chip replacement

1. Remove the existing chip
Use a small screwdriver to lift the large chip out from one side. If you can do this from two sides but if there is a part in the way on the right DON’T bend it out of the way. Just try not to take it out at an angle. Keep wiggling the screwdriver under the chip so you can lift it up at straight as possible.

2. Install the new chip
Make sure the small semicircle notch is on the left side and insert in to the drum. 
Make sure all the legs of the chip are in the socket before pressing it firmly down

Have fun making noisy beats!