HSS3i : Parts list | User guide | Code | PCB
Product page | Build instructions | Code | Board layout | Video, MIDI, bend, and mounting instructions.
POWER
Only power with 7.5V DC tip positive adapters. Do not use the DC plug on the video device.
AV/V
The small button in the top right corner switches between audio+visual mode (patches S1P..) and and only visual mode (patches V1P..).
VIDEO SKEW
Use a small screw driver to adjust the screw inside the brown cylinder on the right edge. This changes the angle of the video.
COLOR FILTERS
Red, green, and blue and can be independently filtered, giving that color softer edges.
VIDEO BENDS
??????????????????????????Ã?HHH??????????
MIDI IN
MIDI MESSAGE TABLE:
CC control: HSS3: type:
————————————–
Control 20 pot 0 variable
Control 21 pot 1 variable
Control 22 pot 2 variable
Control 23 pot 3 variable
Control 24 pot 4 variable
Control 25 pot 5 patch select
Control 26 none volume
note: number type:
————————————–
-C1 0 trigger signal
-C1# 1 mode change (audio+video/video)
TRIGGERS
The HSS3i’s variables can be triggered, IR from Andromeda Space Rocker devices, modular gear, and audio signals.
The potentiometer by the power jack controls trims the level of the Audio input.
See the patches for what exactly is triggered in each mode. Experiment with different signals inputs or use the HSS3i to control your modular with it’s trigger output!
PATCHES
Audio + video modes:
S1P12:
1- Sequence length A
2- Sequence length B
3- Pattern A
4- Pattern B
5- Sequence speed
trigger/audio in: speed
trigger out: speed
S1P15:
1- patterns pitch hight
2- Pattern
3- Sequence length B
4- Audio limiter
5- Sequence speed
trigger/audio in: speed
trigger out: speed
S1P10:
1- Pattern
2- Pattern record delay, sets the interval for when to capture new patterns
3- Amount of kicks
4- Amount of melody
5- Sequence speed
trigger/audio in: speed
trigger out: speed
S1P14:
1- Kick pitch attack
2- Crossfade kick/noise
3- Pattern kick
4- Pattern noise
5- Sequence speed
trigger/audio in: speed
trigger out: speed
S1P11:
1- Melody select A
2- Melody select B
3- Melody generation A
4- Melody generation B
5- Sequence speed
trigger/audio in: speed
trigger out: speed
S1P09:
1- Pitch A
2- Pitch B
3- Pattern A
4- Pattern B
5- Sequence speed
trigger/audio in: speed
trigger out: speed
S1P08:
1- Where to fill wavtable with noise and at what pitch
2- Vibrato depth
3- When to fill wavtable with noise
4- Vibrato speed
5- Filter
trigger/audio in: not used
trigger out: speed
S1P07:
1- Pitch adjust
2- Select sound
3- Patern playback length, also effects pitch
4- extra delay, only active in one of the sounds
5- Fills waveform that is beeing played back
trigger/audio in: not used
trigger out: speed
S1P06:
1- Pitch adjust
2- Wavetable playback length
3- Switch between up or down fade
4- Unused
5- Filter setting in combination with wavetable
trigger/audio in: speed
trigger out: speed
S1P05:
1- Pattern A speed
2- Pattern B speed
3- Pattern C speed
4- Mode select, switches oscillators connected to pots around
5- Interval speed
trigger/audio in: speed
trigger out: speed
S1P04:
1- Pitch position 1
2- Pitch position 2
3- Pitch position 3
4- Pitch position 4
5- Speed
trigger/audio in: speed
trigger out: speed
S1P02:
1- pitch down A&B
2- audio limiter
3- pitch down C
4- waveform generation
5- kick interval
trigger/audio in: bot used
trigger out: speed
S1P03:
1- pitch of oscillators A/B/C/D
2- pitch of oscillators A2/B2/C2/D2
3- volume A/B/C/D
4- volume A2/B2/C2/D2
5- filter
trigger/audio in: not used
trigger out: not used
S1P01:
1- pitch of oscillator A
2- pitch of oscillator B
3- pitch of oscillator C
4- waveform generation
5- filter
trigger/audio in: not used
trigger out: not used
S1P00: (Full clockwise position)
1- pitch of oscillator A/B/C
2- amplitude modulation depth
3- amplitude modulation speed
4- waveform generation
5- filter
trigger/audio in: not used
trigger out: not used
____________________________________________________________________
Video only modes
V1P08: (Full counterclockwise position)
1- virtical scroll and block size
2- virtical scroll and block size
3- block type, 4 positions
4- virtical scroll fine adjustment
5- scroll delay adjustment when trigger in
trigger/audio in: scroll
trigger out: not used
V1P07:
1- line pattern setting red,green,blue
2- horizontal line delay
3- angle line width, automated, speed setting
4- angle line width, automated, length setting
5- ADC settings
trigger/audio in: angle line length invert
trigger out: not used
V1P03:
1- vertical scroll
2- inverted setting red none inverted setting green
3- angle line width, automated, speed setting
4- angle line width, automated, length setting
5- ADC settings
trigger/audio in: horizontal bar lentgh automation
trigger out: not used
V1P06:
1- horizontal bar 1, left to right, automated, speed setting
2- horizontal bar 2, left to right, automated, speed setting
3- horizontal bar 1, up and down in back and forth motion, automated, speed setting
4- horizontal bar 2, up and down in back and forth motion, automated, speed setting
5- vertical scroll
trigger/audio in: automation speedup
trigger out: not used
V1P05:
1- horizontal bar 1, inverted setting red none inverted setting green, automated, length setting
2- horizontal bar 2, inverted setting red none inverted setting green, automated, length setting
3- horizontal bar 3, inverted setting red none inverted setting green, automated, length setting
4- horizontal bar 4, inverted setting red none inverted setting green, automated, length setting
5- vertical scroll
trigger/audio in: automation speedup
trigger out: not used
V1P02:
1- horizontal bar 1, inverted setting red none inverted setting green
2- horizontal bar 2, inverted setting red none inverted setting green
3- horizontal bar 3, inverted setting red none inverted setting green
4- horizontal bar 4, inverted setting red none inverted setting green
5- vertical scroll
trigger/audio in: scroll
trigger out: not used
V1P04:
1- vertical scroll
2- 8 horizontal bars, all possible horizontal positions, color red
3- 8 horizontal bars, all possible horizontal positions, color green
4- angle line width
5- ADC settings
trigger/audio in: inverts horizontal bar settings
trigger out: not used
V1P01: (Full clockwise position)
1- vertical scroll
2- horizontal bar A color red
3- horizontal bar A color green
4- horizontal bar B color red&green
5- ADC settings, faster or slower
trigger/audio in: inverts horizontal bar settings
trigger out: not used